| Alexander Babanin | Australia | I.1 Environment |
| Shuhong Chai | Australia | V.8 Subsea Technology |
| Stephen van Duin | Australia | V.3 Material and Fabrication Technology |
| Roberto Ojeda | Australia | III.1 Ultimate Strength |
| Seref Aksu | Australia | V.7 Structural Longevity,Correspondents |
| Pengfei Liu | Australia | V.4 Offshore Renewable Energy |
| André Hage | Belgium | IV.2 Design Methods |
| Philippe Rigo | Belgium | Standing Committee |
| Abbas Bayatfar | Belgium | III.1 Ultimate Strength |
| Loïc Buldgen | Belgium | V.1 Accidental Limit States |
| Murilo Vaz | Brazil | V.7 Structural Longevity |
| Celso Morooka | Brazil | I.2 Loads |
| Segen Estefen | Brazil | Standing Committee |
| Marcelo Lourenço de Souza | Brazil | III.2 Fatigue and Fracture |
| Jean David Caprace | Brazil | IV.2 Design Methods |
| Ilson Paranhos Pasqualino | Brazil | V.8 Subsea Technology |
| Luis Sagrillo | Brazil | I.1 Environment |
| Bianca de Carvalho Pinheiro | Brazil | V.3 Material and Fabrication Technology |
| Lyudmil Stoev | Bulgaria | V.4 Offshore Renewable Energy |
| Petar Georgiev | Bulgaria | IV.2 Design Methods,Correspondents |
| Jasmin Jelovica | Canada | II.1 Quasi-Static Response |
| Freeman Ralph | Canada | V.6 Arctic Technology |
| Malcolm Smith | Canada | III.1 Ultimate Strength |
| Zbigniew Czaban | Canada | V.5 Special Craft |
| Lorenzo Moro | Canada | IV.2 Design Methods |
| Dustin Pearson | Canada | V.2 Experimental Methods |
| Neil Pegg | Canada | Standing Committee |
| Dexin Zhan | Canada | II.2 Dynamic Response |
| Wei Qiu | Canada | I.1 Environment |
| Bruce Quinton | Canada | V.6 Arctic Technology |
| Marcos Salas | Chile | Correspondents |
| Chuang Fang | China | V.4 Offshore Renewable Energy |
| Xing Hua Shi | China | V.2 Experimental Methods |
| Xiaobin Li | China | V.2 Experimental Methods |
| Fang Wang | China | III.2 Fatigue and Fracture |
| Jingxia Yue | China | III.2 Fatigue and Fracture |
| Sheng Dong | China | I.1 Environment |
| Deqing Yang | China | II.1 Quasi-Static Response |
| Zhengquan Wan | China | V.6 Arctic Technology |
| Ning Ma | China | VI.1 ISSC-ITTC Cooperation |
| Youfang Chen | China | IV.2 Design Methods |
| Jun Wang | China | II.1 Quasi-Static Response |
| Jianhu Liu | China | II.2 Dynamic Response |
| Guiyong ZHANG | China | II.2 Dynamic Response |
| Huilong Huilong Ren | China | V.6 Arctic Technology |
| Chunyan Ji | China | V.4 Offshore Renewable Energy |
| Wenyong Tang | China | IV.2 Design Methods |
| Chao Tian | China | I.2 Loads |
| Guoqing Feng | China | V.7 Structural Longevity |
| Nana Yang | China | V.3 Material and Fabrication Technology |
| Luo Yu | China | V.3 Material and Fabrication Technology |
| Liangbi Li | China | V.7 Structural Longevity |
| Yanzhuo Xue | China | V.1 Accidental Limit States |
| Liping Sun | China | V.8 Subsea Technology |
| Deyu Wang | China | III.1 Ultimate Strength |
| Xueliang Wang | China | V.5 Special Craft |
| Hanbing Luo | China | V.5 Special Craft |
| Zhihu Zhan | China | IV.1 Design Principles and Criteria |
| Ling Zhu | China | IV.1 Design Principles and Criteria |
| Ming Cai Xu | China | III.1 Ultimate Strength |
| Yingqiu Chen | China | Standing Committee |
| Menglan Duan | China | V.8 Subsea Technology,Chair |
| Yun-Tzu Huang | China (Taiwan) | II.1 Quasi-Static Response |
| Rong-Juin Shyu | China (Taiwan) | II.2 Dynamic Response,Correspondents |
| Chung-Ping Chen | China (Taiwan) | IV.2 Design Methods |
| Chih-Chung Fang | China (Taiwan) | I.2 Loads |
| Yann Quemener | China (Taiwan) | III.2 Fatigue and Fracture |
| Hui-Lung Chien | China (Taiwan) | V.3 Material and Fabrication Technology |
| Jerolim Andric | Croatia | II.1 Quasi-Static Response |
| Paul paul Jurisic | Croatia | V.7 Structural Longevity |
| Pero Prebeg | Croatia | IV.2 Design Methods |
| Albert Zamarin | Croatia | V.3 Material and Fabrication Technology |
| Nikola Vladimir | Croatia | II.2 Dynamic Response |
| Vedran Zanic | Croatia | IV.1 Design Principles and Criteria,Correspondents |
| Josko Parunov | Croatia | VI.1 ISSC-ITTC Cooperation |
| Jasna Prpic-Orsic | Croatia | I.2 Loads |
| Ivan Catipovic | Croatia | V.4 Offshore Renewable Energy |
| Constantine Michailides | Cyprus | V.2 Experimental Methods |
| Anders Brandt | Denmark | II.2 Dynamic Response |
| Kim Branner | Denmark | III.2 Fatigue and Fracture,Correspondents |
| Christian Berggreen | Denmark | V.2 Experimental Methods |
| Harry Bingham | Denmark | V.4 Offshore Renewable Energy |
| Claus Myllerup | Denmark | V.8 Subsea Technology |
| Michael Rye Andersen | Denmark | V.7 Structural Longevity |
| Marie Lützen | Denmark | III.1 Ultimate Strength |
| John Wægter | Denmark | V.1 Accidental Limit States |
| Heba Leheta | Egypt | Correspondents |
| Saad Saad-Eldeen | Egypt | III.1 Ultimate Strength |
| Kristjan Tabri | Estonia | V.1 Accidental Limit States,Correspondents |
| Jani Romanoff | Finland | V.2 Experimental Methods,Correspondents |
| Ingrit Lillemäe | Finland | III.2 Fatigue and Fracture |
| Heikki Remes | Finland | V.3 Material and Fabrication Technology |
| Mihkel Kõrgesaar | Finland | V.1 Accidental Limit States |
| Arttu Polojärvi | Finland | V.6 Arctic Technology |
| Satu Hänninen | Finland | I.2 Loads |
| Jean-Yves Pradillon | France | Standing Committee |
| Abderrahim Bentamy | France | I.1 Environment |
| Guy Parmentier | France | III.2 Fatigue and Fracture |
| Sime Malenica | France | II.2 Dynamic Response |
| Guillaume de Hauteclocque | France | I.2 Loads |
| Bettar el Moctar | Germany | II.2 Dynamic Response |
| Frank Roland | Germany | V.3 Material and Fabrication Technology |
| Jörg Rörup | Germany | III.2 Fatigue and Fracture |
| Holger Mumm | Germany | I.2 Loads |
| Patrick Kaeding | Germany | Standing Committee |
| Gundula Stadie | Germany | V.1 Accidental Limit States |
| Michael Holtmann | Germany | V.5 Special Craft |
| Frank Adam | Germany | V.4 Offshore Renewable Energy |
| Sören Ehlers | Germany | V.6 Arctic Technology,Chair |
| Walter Kuehnlein | Germany | V.6 Arctic Technology |
| Robert Bronsart | Germany | IV.2 Design Methods |
| Spyros Mavrakos | Greece | V.8 Subsea Technology |
| Manolis Samuelides | Greece | Standing Committee |
| Piero Caridis | Greece | V.7 Structural Longevity |
| Yiannis Chatzigeorgiou | Greece | I.2 Loads |
| Apostolos Papanikolaou | Greece | VI.1 ISSC-ITTC Cooperation |
| Debabrata Karmakar | India | V.4 Offshore Renewable Energy |
| Asokendu Samanta | India | V.8 Subsea Technology,Correspondents |
| Suhas Vhanmane | India | III.2 Fatigue and Fracture |
| Sharad Dhavalikar | India | I.2 Loads |
| Fredhi Agung Prasetyo | Indonesia | I.1 Environment |
| Mohammad Kurniawan | Indonesia | Correspondents |
| Kieran Kavanagh | Ireland | V.8 Subsea Technology |
| Wanan Sheng | Ireland | V.4 Offshore Renewable Energy |
| Dario Boote | Italy | V.7 Structural Longevity |
| Enrico Rizzuto | Italy | V.1 Accidental Limit States,Chair |
| Andrea Ivaldi | Italy | II.2 Dynamic Response |
| Cesare Mario Rizzo | Italy | III.2 Fatigue and Fracture |
| Ermina Begovic | Italy | V.5 Special Craft |
| Giuseppina Colicchio | Italy | V.4 Offshore Renewable Energy |
| Marco Gaiotti | Italy | V.3 Material and Fabrication Technology |
| Matteo Sidari | Italy | II.1 Quasi-Static Response |
| Mauro Sicchiero | Italy | IV.2 Design Methods |
| Stefano Ferraris | Italy | Standing Committee |
| Daniele Dessi | Italy | V.2 Experimental Methods,Chair |
| Yasumi Kawamura | Japan | II.1 Quasi-Static Response |
| Tsutomu Fukui | Japan | V.6 Arctic Technology |
| Ryuji Miyake | Japan | I.1 Environment |
| Kazuhiro Iijima | Japan | VI.1 ISSC-ITTC Cooperation |
| Tadashi Sugimura | Japan | V.2 Experimental Methods |
| Daisuke Yanagihara | Japan | III.1 Ultimate Strength |
| Hideaki Murayama | Japan | V.7 Structural Longevity |
| Masahiko Fujikubo | Japan | Standing Committee |
| Tetsuya Nakamura | Japan | III.2 Fatigue and Fracture |
| Tetsuo Okada | Japan | IV.1 Design Principles and Criteria |
| Katsuyuki Suzuki | Japan | V.1 Accidental Limit States |
| Masahiko Ozaki | Japan | V.8 Subsea Technology |
| Toshiro Arima | Japan | IV.1 Design Principles and Criteria |
| Naoki Osawa | Japan | V.3 Material and Fabrication Technology |
| Masanobu Toyoda | Japan | IV.2 Design Methods |
| Akihiro Yasuda | Japan | V.5 Special Craft |
| Yasuhira Yamada | Japan | II.2 Dynamic Response |
| Yoshitaka Ogawa | Japan | I.2 Loads,Chair |
| Tomoaki Utsunomiya | Japan | V.4 Offshore Renewable Energy |
| Adi Maimun | Malaysia | Correspondents |
| Noor Amila | Malaysia | V.7 Structural Longevity |
| Mohd Shahir Liew | Malaysia | III.2 Fatigue and Fracture |
| Oscar Valle | Mexico | Correspondents |
| Richard George James Flay | New Zealand | Correspondents |
| Zhen Gao | Norway | V.4 Offshore Renewable Energy,Chair |
| Gabriele Notaro | Norway | III.1 Ultimate Strength |
| Gaute Storhaug | Norway | II.2 Dynamic Response |
| Agnes Marie Horn | Norway | V.3 Material and Fabrication Technology |
| Elzbieta Bitner-Gregersen | Norway | VI.1 ISSC-ITTC Cooperation |
| Sigmund Kyrre Ås | Norway | III.2 Fatigue and Fracture |
| Johan Slatte | Norway | V.4 Offshore Renewable Energy |
| Odin Gramstad | Norway | I.1 Environment |
| José Miguel dos Santos Sousa Rodrigues | Norway | V.4 Offshore Renewable Energy |
| Rune Torhaug | Norway | Standing Committee |
| Jurek Czujko | Norway | III.1 Ultimate Strength,Chair |
| Nuno Fonseca | Norway | I.2 Loads |
| Thomas B. Johannessen | Norway | I.2 Loads |
| Lars Brubak | Norway | V.1 Accidental Limit States |
| Svein Saevik | Norway | V.8 Subsea Technology |
| Ekaterina Kim | Norway | V.6 Arctic Technology |
| Ole Andreas Hermundstad | Norway | II.2 Dynamic Response |
| Svein Erling Heggelund | Norway | II.1 Quasi-Static Response |
| Rolf Skjong | Norway | IV.1 Design Principles and Criteria |
| Bernt Leira | Norway | V.7 Structural Longevity |
| Per Olav Moslet | Norway | V.6 Arctic Technology |
| Janusz Kozak | Poland | Correspondents |
| Zbigniew Sekulski | Poland | IV.2 Design Methods |
| Maciej Taczala | Poland | II.1 Quasi-Static Response |
| Carlos Guedes Soares | Portugal | Standing Committee,Chair |
| Manuel Ventura | Portugal | V.5 Special Craft |
| Ricardo Campos | Portugal | I.1 Environment |
| Jose Gordo | Portugal | III.1 Ultimate Strength |
| Yordan Garbatov | Portugal | III.2 Fatigue and Fracture,Chair |
| José Varela | Portugal | IV.2 Design Methods |
| Angelo Teixeira | Portugal | V.8 Subsea Technology |
| Joao Mendonca Santos | Portugal | IV.2 Design Methods |
| Ionel Chirica | Romania | Correspondents |
| Valerii Shaposhnikov | Russia | V.6 Arctic Technology,Correspondents |
| Xudong Qian | Singapore | III.1 Ultimate Strength |
| Ying Min Low | Singapore | V.8 Subsea Technology |
| Yoo Sang Choo | Singapore | Standing Committee |
| Wei Bai | Singapore | I.2 Loads |
| Jooshin Park | South Korea | III.1 Ultimate Strength |
| Jung Kwan Seo | South Korea | V.8 Subsea Technology |
| Myung Hyun. Kim | South Korea | V.3 Material and Fabrication Technology |
| Kang Hyun Song | South Korea | I.2 Loads |
| Gyu Sung Kim | South Korea | V.1 Accidental Limit States |
| Byeong Ki Choi | South Korea | III.2 Fatigue and Fracture |
| Jeom Kee Paik | South Korea | Standing Committee |
| Young-Cheol Huh | South Korea | II.2 Dynamic Response |
| Han Koo Jeong | South Korea | IV.1 Design Principles and Criteria |
| Hyun Kyoung Shin | South Korea | V.4 Offshore Renewable Energy |
| Beom Seon Jang | South Korea | II.1 Quasi-Static Response |
| Francisco Viejo | Spain | III.2 Fatigue and Fracture,Correspondents |
| Per Lindstrom | Sweden | III.2 Fatigue and Fracture |
| Lennart Josefson | Sweden | V.3 Material and Fabrication Technology,Correspondents,Chair |
| Wengang Mao | Sweden | I.1 Environment |
| Jonas Ringsberg | Sweden | II.1 Quasi-Static Response,Chair |
| Sebastian Schreier | The Netherlands | V.8 Subsea Technology |
| Ingo Drummen | The Netherlands | II.2 Dynamic Response |
| Ad van Hoeve | The Netherlands | II.1 Quasi-Static Response |
| Mark Tammer | The Netherlands | V.7 Structural Longevity |
| Pieter Swart | The Netherlands | V.8 Subsea Technology |
| Henk den Besten | The Netherlands | III.2 Fatigue and Fracture |
| Joep Broekhuijsen | The Netherlands | III.1 Ultimate Strength |
| Ingrid Schipperen | The Netherlands | V.1 Accidental Limit States |
| Alex Vredeveldt | The Netherlands | V.6 Arctic Technology |
| Geert Kapsenberg | The Netherlands | I.1 Environment |
| Mirek Lech Kaminski | The Netherlands | Standing Committee |
| Martijn Hoogeland | The Netherlands | V.2 Experimental Methods |
| Ahmet Ergin | Turkey | II.2 Dynamic Response,Correspondents,Chair |
| Bahadır Uğurlu | Turkey | I.2 Loads |
| James Blake | UK | V.7 Structural Longevity |
| Peter Thomson | UK | IV.1 Design Principles and Criteria |
| James Underwood | UK | II.1 Quasi-Static Response |
| Jon Downes | UK | II.2 Dynamic Response |
| Spiro J. Pahos | UK | III.1 Ultimate Strength |
| Zhiqiang Hu | UK | V.1 Accidental Limit States |
| Alan John Murphy | UK | I.1 Environment |
| Nianzhong Chen | UK | V.7 Structural Longevity |
| Spyros Hirdaris | UK | VI.1 ISSC-ITTC Cooperation |
| Mayorkinos Papaelias | UK | V.3 Material and Fabrication Technology |
| Iraklis Lazakis | UK | IV.2 Design Methods,Chair |
| Ajit Shenoi | UK | Standing Committee |
| Simon Benson | UK | III.1 Ultimate Strength |
| Atanasios Kolios | UK | V.4 Offshore Renewable Energy |
| David Ingram | UK | V.4 Offshore Renewable Energy |
| Feargal Brennan | UK | V.2 Experimental Methods |
| Richard Villavicencio | UK | III.2 Fatigue and Fracture |
| Erkan Oterkus | UK | V.5 Special Craft |
| Rachel Nicholls-Lee | UK | V.5 Special Craft |
| Van Lien | USA | I.2 Loads |
| Sue Wang | USA | I.2 Loads |
| Pradeep Sensharma | USA | V.5 Special Craft |
| Darren Truelock | USA | V.5 Special Craft,Chair |
| Jihed Boulares | USA | III.1 Ultimate Strength |
| Jaideep Sirkar | USA | V.6 Arctic Technology |
| Dale Karr | USA | V.4 Offshore Renewable Energy |
| Xiaozhi Wang | USA | Standing Committee |
| Matthew Collette | USA | IV.1 Design Principles and Criteria,Chair |
| Erick Alley | USA | II.2 Dynamic Response |
| Paul Lara | USA | II.1 Quasi-Static Response |
| Stefano Brizzolara | USA | VI.1 ISSC-ITTC Cooperation |
| Ken Nahshon | USA | V.1 Accidental Limit States |
| Pingsha Dong | USA | III.2 Fatigue and Fracture |
| Robert Sielski | USA | IV.2 Design Methods |
| Hao Song | USA | V.8 Subsea Technology |
| Paul Hess | USA | V.7 Structural Longevity,Chair |
| Thomas Fu | USA | I.1 Environment,Chair |
| George Wang | USA | V.2 Experimental Methods |
| Brajendra Mishra | USA | V.3 Material and Fabrication Technology |
| Aleksandr Nilva | Ukraine | V.1 Accidental Limit States |
| Alexander Egorov | Ukraine | V.7 Structural Longevity |
| Gennadiy Egorov | Ukraine | IV.1 Design Principles and Criteria,Correspondents |
| Igor Ilnytskiy | Ukraine | IV.2 Design Methods |
| Tuan Le Dinh | Vietnam | Correspondents |
Members sorted by country